CFGJP - XR BOND ADHESIVE RESIN
- MSDS: CFGJP
- Manufacturer: KERR CORP
- Product Name: XR BOND ADHESIVE RESIN
- National Stock Number: 6520-00F054048
Product Identification
Product ID:XR BOND ADHESIVE RESIN
MSDS Date:11/07/1995
FSC:6520
NIIN:00F054048
MSDS Number: CFGJP
Responsible Party
ORANGE, CA 92667-5000
US
Emergency Phone: 800-537-7123
Info Phone: 800-537-7123
Cage: GO317
Contractor
Telephone: 800-537-7123
Cage: GO317
Ingredients
TRIETHYLENE GLYCOL DIMETHACRYLATE
CAS: 109-16-0
RTECS: OZ4100000
Fraction By Weight: <90-100%
ALKYL DIMETHACRYLATES
Fraction By Weight: <90-100%
Hazards
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: MAY CAUSE IRRITATION & DAMAGE.
SKIN: PROLONGED/REPEATED EXPOSURE TO UNCURED MATERIAL MAY CAUSE
IRRITATION. INHALATION: MAY CAUSE RESPIRATORY TRACT IRRITATION.
INGESTION: UNCURED MATERIAL MAY BE HARMFUL/FATAL.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, RASH.
First Aid
First Aid:EYES: FLUSH W/WATER FOR 15 MINS. SKIN: WASH W/SOAP & WATER.
INHALATION: REMOVE TO FRESH AIR. INGESTION: RINSE MOUTH OUT
W/WATER. DON'T INDUCE VOMITING. OBTAIN MEDICAL ATTENTION IN ALL
CASES.
Fire Fighting
Extinguishing Media:CHEMICAL FOAM, CO2, DRY CHEMICAL.
Fire Fighting Procedures:WEAR A SCBA.
Unusual Fire/Explosion Hazard:HEAT CAN CAUSE POLYMERIZATION W/RAPID
RELEASE OF ENERGY.
Accidental Release
Spill Release Procedures:ABSORB W/INERT MATERIAL. KEEP MATERIAL OUT OF
SEWERS.
Handling
Handling and Storage Precautions:STORE IN A COOL, DRY PLACE AWAY FROM
HEAT, LIGHT & IGNITION SOURCES.
Other Precautions:AVOID PROLONGED/EXCESSIVE BREATHING OF VAPORS OF
UNCURED MATERIAL. AVOID UNNECESSARY EXPOSURE TO UNCURED MATERIAL.
Exposure Controls
Ventilation:GOOD GENERAL SHOULD BE SUFFICIENT TO CONTROL AIRBORNE
LEVELS OF VAPORS RELEASED BY UNCURED MATERIAL.
Protective Gloves:IMPERVIOUS RUBBER
Eye Protection:SAFETY GLASSES
Work Hygienic Practices:HANDLE IAW/GOOD PERSONAL HYGIENE & SAFETY
PRACTICES.
Supplemental Safety and Health
Chemical Properties
Spec Gravity:1.1
Solubility in Water:INSOLUBLE
Appearance and Odor:LIGHT YELLOW LIQUID W/FRUITY ESTER-LIKE ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
REDUCING & OXIDIZING AGENTS, PEROXIDES & AMINES.
Stability Condition to Avoid:HEAT, LIGHT, AGING & CONTAMINATION.
Hazardous Decomposition Products:OXIDES OF CARBON.
Conditions to Avoid Polymerization:HEAT, LIGHT, AGING & SOURCES OF
CONTAMINATION.
Disposal
Waste Disposal Methods:UNPOLYMERIZED (UNCURED) MATERIAL MAY BE RCRA
HAZARDOUS WASTE. INCINERATE UNCURED MATERIAL IAW/FEDERAL, STATE &
LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.